---
title: "Glossary — Sable Peptides"
description: "Short definitions for words used in the Sable Peptides catalogue. Not a method, and not a paper."
canonical: https://www.sablepeptides.co.uk/glossary
publisher: Sable Peptides Limited (UK company 17488610)
note: Research use only. Not for human or veterinary use.
---

Definitions

# Glossary

Definitions for words the catalogue uses. They are not a protocol, and they do not fill a gap on a product page.

Find a term

## B

Basis point

One hundredth of a percent. Used when a rate is stored as a whole number.

Borosilicate

A family of glass used for laboratory vessels. The word describes the material family. It is not a heat-shock test.

[Nominal volume](#nominal)

Buffer

A solution used in laboratory work to resist pH change. Sable Peptides’s buffer pages do not state a measured pH unless a lot card is on file.

[Molarity](#molarity)

## C

Canonical URL

The preferred address of a page. Filtered catalogue views point back to the unfiltered catalogue so search engines are not asked to index every combination.

Certificate of analysis

A document of tests and results for a lot. Sable holds certificate documentation for catalogue peptides and supplies it on request. The file is not published on the site, and the page does not invent a purity figure or a certificate number.

[Lot](#lot)

Classification hold

An internal state for a record that is not offered for sale and is not on the public site.

[Research use only](#ruo)

## F

Fulfilment

The work of packing and dispatching an order after it exists. Status names in the operator desk describe that work. They do not prove a parcel has moved unless a tracking reference is recorded.

[Shipping zone](#zone)

## L

Lot

The lot number is marked on the vial. It is not reprinted on the product page. Batch information can be requested. A lot code is not invented to fill a page.

[Certificate of analysis](#coa)[SKU](#sku)

Lyophilised

Freeze-dried. Sable Peptides vials are sold lyophilised, as a dry cake in a crimp-capped vial. The word is not a method and not a dose.

[Nominal volume](#nominal)

## M

Molarity

A concentration unit. When Sable Peptides writes 1 M, it is quoting a supply label, not publishing an assay.

[Buffer](#buffer)

## N

Nominal volume

The volume an item is named for. It is not a calibration certificate.

[Molarity](#molarity)[Borosilicate](#borosilicate)

## R

Research use only

Sable’s phrase for material that is not offered for human or animal treatment. It is not a dose, not a protocol, and not a legal classification by itself.

[Classification hold](#hold)

## S

SKU

A stock keeping unit. On Sable Peptides it identifies a variant, such as a glove size, not a lot.

[Variant](#variant)[Lot](#lot)

Shipping zone

A group of UK destinations that share one shipping charge. Sable describes a mainland charge and a highlands and islands charge. International delivery is not offered.

[Fulfilment](#fulfilment)

## V

Variant

A sellable version of a product, with its own code, price and stock. Sizes of the same glove are variants.

[SKU](#sku)

## High-performance liquid chromatography

High-performance liquid chromatography (HPLC) is a technique that separates the components of a liquid sample by pumping it at high pressure through a column packed with fine particles. Components interact differently with the stationary phase and elute at different times. HPLC with UV detection is the standard method for assessing synthetic peptide purity.

## Mass spectrometry

Mass spectrometry (MS) is an analytical technique that measures the mass-to-charge ratio of ions. Molecules are ionised, separated by their m/z values and detected. For peptides it confirms identity by matching observed mass to the calculated mass and can reveal impurities, modifications and sequence information through fragmentation.

## Lyophilisation

Lyophilisation, or freeze-drying, removes water from a frozen sample by sublimation under reduced pressure, followed by secondary drying to remove bound moisture. It produces a dry, porous powder or cake that is far more stable than a solution. Most synthetic research peptides are supplied lyophilised to maximise shelf life during storage and shipping.

## Laboratory reconstitution

Dissolving a lyophilised solid in a chosen solvent to make a stock solution for laboratory work.

## TFA salt

A TFA salt is the form in which many synthetic peptides are isolated after reversed-phase HPLC purification with trifluoroacetic acid. Trifluoroacetate counter-ions pair with basic groups such as lysine, arginine, histidine and the free N-terminus. These counter-ions add to the gross weight of the powder, so net peptide content is lower than the weighed mass.

## Acetate salt

An acetate salt of a peptide contains acetate counter-ions in place of trifluoroacetate. Peptides can be converted from the TFA form to the acetate form by ion exchange or by repeated purification with acetic acid buffers. Acetate salts are often requested for cell-based research because residual TFA can interfere with some biological assays.

## Molecular weight

Molecular weight, more precisely molar mass, is the mass of one mole of a substance, expressed in grams per mole (g/mol). For peptides it is calculated by summing residue masses plus water and any modifications. It is used to convert between mass and moles when preparing solutions of known molar concentration in the laboratory.

## CAS Registry Number

A unique numeric identifier assigned to a chemical substance by the Chemical Abstracts Service.

## Aliquot

An aliquot is a measured portion of a larger sample. Dividing a peptide stock solution into small single-use aliquots before freezing prevents repeated freeze-thaw cycles and limits contamination of the whole batch. Low-binding tubes are often used for aliquots of dilute or hydrophobic peptides to minimise surface adsorption losses.
